Mad Professor Ruby Red Booster (RRB) is a combination of two boosters and a switchable buffer. The two boosters are based on the much sought after BJF Little Red Trebler and Red Rooster Booster, connected in that order and with a master volume control.
Mad Professor Ruby Red Booster (RRB) is a combination of two boosters and a switchable buffer. The two boosters are based on the much sought after BJF Little Red Trebler and Red Rooster Booster, connected in that order and with a master volume control.
The RRB can be used as a treble booster, a clean boost or an overdrive unit or any combination of the above. Inside the pedal there is a switch for a high quality buffer. You can set the pedal for true bypass mode or "buffer on" in bypass mode. The Treble Booster is a fine-tuned booster for just the right treble frequency with carefully designed bandwidth and an optimized slope of bass cut. The booster circuit is designed to overdrive the amplifier inputs from nice shimmer to heavy overdrive, thanks to the massive 40dB of boost. The booster is tuned so that it produces musical distortion by itself on higher boost settings.
You can control the total level of the two boosters with the Master Volume control and also use the Master Volume to achieve distortion from the unit. The easy to use Mad Professor Ruby Red Booster must be the most versatile high quality booster on market. Build the Mad Professor way: small footprint and big tone.
The RRB buffer output impedance is set a little lower than the DC resistance of a standard guitar pickup to equalize the effect of following load impedance. Input impedance is set at 500K for a medium load to standard guitar pickups. This keeps the tone and guitar volume taper natural.
Electrical specifications:
Input impedance: | approximately 500K Ohm's |
Recommended output load: | 50K Ohm's or higher, effects output and buffer output |
Current consumption: | @ 9V DC approximately 6mA |
DC supply voltage range: | 8 - 18V |
Voltage gain approximately: | +40dB |
Treble boost peak: | +15dB@4KHz |
Signal to noise ratio: | 110 dB |
Effect 3dB bandwidth: | 70Hz to 7KHz |
True bypass or buffered (switchable inside the pedal) |
Authorization | N/A |
---|---|
MPN | RRB PCB |