SS-30 Bulava 3 Channel JFET Guitar Preamp

Questions?

Contact Phantom48 Customer Support.

AMT Electronics SS-30 Bulava 3 Channel JFET Guitar Preamp

$274.95
MSRP: $399.95 (Save 31%)
Special-Order

The SS-30 Bulava 3 Channel JFET Guitar Preamp is temporarily out of stock. Order today and Phantom48 will normally ship in about No business days.

The SS-30 is a 3 channel JFET preamp loaded with maximum power and crunch. The SS-20 Bulava pedal is a non-tube JEFT driven preamp, offering modern high gain metal tones in a small ...More Info

Details

The SS-30 is a 3 channel JFET preamp loaded with maximum power and crunch. The SS-20 Bulava pedal is a non-tube JEFT driven preamp, offering modern high gain metal tones in a small portable enclosure. Priced at a consumer friendly cost, the SS-30 is sure to win the most punch for the buck award. Just listen to the demo and decide for yourself!

Three Independent Channels

Features 3 switchable channels, each with their own master control for precise leveling of all channels.

EQ Controls

Clean and Crunch/Lead have their own 3 band EQ of Low, Mids, and High for customization of each channel.

Tone Contour Buttons

The SS-30 includes three switchable buttons for added tone options.

  • Drive tone shift
  • Crunch bright
  • Clean boost

FX Loop for Added Effects

The SS-30 also includes an FX Loop for adding external modulation effects in the correct signal chain location.

Blistering Crunch and Lead Tones

Design focused to simulate ultra high gain amp heads, this give your expensive amplifiers a run for their money! Never has there been such an affordable, feature packed, amazing sounding 3 channel guitar preamp as the SS-30 Bulava.

Direct to Amplifier or Computer/DAW/Mixer

As all AMT pedals, the SS-30 is equipped with dual outputs. One for connection to a guitar amplifier, and one for direct connection to a computer, DAW, or mixing device. Into home or studio recording? Never again will you have to connect your mics, preamps, cables, and mic stands to get a great recorded guitar tone. Everything you need is built in to the SS-30. Simply choose the speaker simulated cabinet output, and you're ready to make professional studio-grade recordings with no extra effort!

Details

Specifications:

  • Powered by two 9V batteries or optional 18V DC power adapter
  • Negative center polarity (-) at 8mA
  • FX Loop send and return jacks
  • 2 Footswiches
  • 3 Channels: Clean, Crunch, Lead
  • Amp out and cabinet simulated outputs
  • Tone shift, clean boost, and bright dull switches
  • 3.5 mm jack to control external MIDI devices

Description

Details

The SS-30 is a 3 channel JFET preamp loaded with maximum power and crunch. The SS-20 Bulava pedal is a non-tube JEFT driven preamp, offering modern high gain metal tones in a small portable enclosure. Priced at a consumer friendly cost, the SS-30 is sure to win the most punch for the buck award. Just listen to the demo and decide for yourself!

Three Independent Channels

Features 3 switchable channels, each with their own master control for precise leveling of all channels.

EQ Controls

Clean and Crunch/Lead have their own 3 band EQ of Low, Mids, and High for customization of each channel.

Tone Contour Buttons

The SS-30 includes three switchable buttons for added tone options.

  • Drive tone shift
  • Crunch bright
  • Clean boost

FX Loop for Added Effects

The SS-30 also includes an FX Loop for adding external modulation effects in the correct signal chain location.

Blistering Crunch and Lead Tones

Design focused to simulate ultra high gain amp heads, this give your expensive amplifiers a run for their money! Never has there been such an affordable, feature packed, amazing sounding 3 channel guitar preamp as the SS-30 Bulava.

Direct to Amplifier or Computer/DAW/Mixer

As all AMT pedals, the SS-30 is equipped with dual outputs. One for connection to a guitar amplifier, and one for direct connection to a computer, DAW, or mixing device. Into home or studio recording? Never again will you have to connect your mics, preamps, cables, and mic stands to get a great recorded guitar tone. Everything you need is built in to the SS-30. Simply choose the speaker simulated cabinet output, and you're ready to make professional studio-grade recordings with no extra effort!

Specifications

Details

Specifications:

  • Powered by two 9V batteries or optional 18V DC power adapter
  • Negative center polarity (-) at 8mA
  • FX Loop send and return jacks
  • 2 Footswiches
  • 3 Channels: Clean, Crunch, Lead
  • Amp out and cabinet simulated outputs
  • Tone shift, clean boost, and bright dull switches
  • 3.5 mm jack to control external MIDI devices