Reamp Kit

Questions?

Contact Phantom48 Customer Support.

Radial Engineering Reamp Kit

$290.40
MSRP: $440.00 (Save 34%)
Special-Order

The Reamp Kit is temporarily out of stock. Order today and Phantom48 will normally ship in about 7-10 business days.

The Reamp® JCR™ is a passive Reamper™ that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead ...More Info

Details

The Reamp® JCR™ is a passive Reamper™ that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.

The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.

With today's unlimited track capabilities, Reamping is now accessible to everyone. And Reamping is no longer just for guitars… It is now common to Reamp bass, keyboards, drums, violin… you name it. In fact, Reamping is the magic ingredient that has brought many of the most esteemed recordings to life.

Details

Key Features:

  • Lets you re-record tracks through a guitar or bass amp
  • Original Reamp circuit designed by John Cuniberti
  • Plug and play easy to use passive design
  • Improves productivity while expanding creative options
  • Balanced Line-Level XLR Input
  • Input Ground Lift
  • Output Mute Switch
  • Adjustable Output Level
  • 1kHz Hi-cut Filter
  • 180Hz Low Cut Filter
  • Phase Reverse Switch

X-Amp Specifications:

Audio circuit type:100% discrete class-A
Frequency response:20Hz ~ 15kHz (± 1.0dB)
Signal to noise ratio:88dB below instrument level (-20dBu)
Dynamic range:119dB
Noise floor:OUT-1 -110dB; OUT-2 -108dBu
Maximum input:+22dBu
Total harmonic distortion:0.02% @ -15dBu
Inter-modulation distortion:0.02% @ -20dBu
Input impedance:600Ω

J48 Specifications:

Audio circuit type:Proprietary analog circuit with low-noise op-amp
Frequency response:20Hz ~ 20kHz (± 1.5dB)
Dynamic range:109dB
Noise floor:-99dB below 0dBu
Equivalent input noise:-103dBu
Maximum input:+10dBu
Phase deviation:+10º at 20Hz | 0º at 1kHz | -1º at 20kHz
Total harmonic distortion:0.002% @ -5dBu
Inter-modulation distortion:0.003% @ -3dBu
Input impedance:220kΩ - ¼" input
Output impedance:600Ω - XLR output

Details

Description

Details

The Reamp® JCR™ is a passive Reamper™ that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.

The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.

With today's unlimited track capabilities, Reamping is now accessible to everyone. And Reamping is no longer just for guitars… It is now common to Reamp bass, keyboards, drums, violin… you name it. In fact, Reamping is the magic ingredient that has brought many of the most esteemed recordings to life.

Specifications

Details

Key Features:

  • Lets you re-record tracks through a guitar or bass amp
  • Original Reamp circuit designed by John Cuniberti
  • Plug and play easy to use passive design
  • Improves productivity while expanding creative options
  • Balanced Line-Level XLR Input
  • Input Ground Lift
  • Output Mute Switch
  • Adjustable Output Level
  • 1kHz Hi-cut Filter
  • 180Hz Low Cut Filter
  • Phase Reverse Switch

X-Amp Specifications:

Audio circuit type:100% discrete class-A
Frequency response:20Hz ~ 15kHz (± 1.0dB)
Signal to noise ratio:88dB below instrument level (-20dBu)
Dynamic range:119dB
Noise floor:OUT-1 -110dB; OUT-2 -108dBu
Maximum input:+22dBu
Total harmonic distortion:0.02% @ -15dBu
Inter-modulation distortion:0.02% @ -20dBu
Input impedance:600Ω

J48 Specifications:

Audio circuit type:Proprietary analog circuit with low-noise op-amp
Frequency response:20Hz ~ 20kHz (± 1.5dB)
Dynamic range:109dB
Noise floor:-99dB below 0dBu
Equivalent input noise:-103dBu
Maximum input:+10dBu
Phase deviation:+10º at 20Hz | 0º at 1kHz | -1º at 20kHz
Total harmonic distortion:0.002% @ -5dBu
Inter-modulation distortion:0.003% @ -3dBu
Input impedance:220kΩ - ¼" input
Output impedance:600Ω - XLR output

Video

Details