EXTC-SA

Questions?

Contact Phantom48 Customer Support.

Radial Engineering EXTC-SA

$259.99
MSRP: $300.00 (Save 13%)
Special-Order

The EXTC-SA is temporarily out of stock. Order today and Phantom48 will normally ship in about 7-10 business days.

The Radial EXTC-SA™ is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine… add a touch of grit to a vocal ...More Info

Details

The Radial EXTC-SA™ is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine… add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin…The EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd.

And it's super easy to use: connect a line level signal from the recording system. The EXTC-SA unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Simply plug in, turn the track on, set your levels and adjust the blend for just the right amount of magic. Be prepared for instant amazement. Legalized ecstasy.

Features include Radial's award winning 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, and two loops that can let you compare signal paths or combine them to create your magical masterpiece.

The Radial EXTC-SA is without a doubt one of the most innovative effect manipulating devices ever made. And it opens the door to new sounds by taking Reamping™ technology to an all new level.

The EXTC... be prepared for wild & wonderful!

Details

Key Features:

  • Balanced interface for guitar effects pedals
  • Separate send & receive controls optimize signal path
  • Transformer isolation helps eliminate ground loops
  • Creative tool helps your mix stand out from the rest

Specifications:

Circuit type:Solid state with transformer coupled effects loop
Power requirement:60mA, ±16VDC
Output Gain:12dB - send & receive at maximum
SignalDryWet
Frequency Response:20Hz ~ 20kHz ±1.5dB20Hz ~ 10kHz ±3.5dB (-8dB @ 20kHz)
THD+N:>0.005% 0dB output>0.002% 0dB output
Noise:-93dB-84dB
Intermodulation Distortion:>0.003% 0dBu input<0.02% 0dBu input
Maximum input:+26dBu+20dBu
Effects Loop i/oSend 1/4" outputReceive 1/4" input
Connector:Unbalanced ¼"Unbalanced ¼"
Impedance:1.5k Ohms10K Ohms
Gain (Variable):From -14dB ~ +3dB 0dB at center pointFrom -99dB ~ +9dB 0dB at center point
Maximum Gain:±3dB+9dB
Line level i/oInputOutput
Connector*:Balanced XLR Female Rear PanelBalanced XLR Male Rear Panel
Impedance:15k Ohms200 Ohms
Headroom:N/A+25dBu

Details

Description

Details

The Radial EXTC-SA™ is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine… add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin…The EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd.

And it's super easy to use: connect a line level signal from the recording system. The EXTC-SA unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Simply plug in, turn the track on, set your levels and adjust the blend for just the right amount of magic. Be prepared for instant amazement. Legalized ecstasy.

Features include Radial's award winning 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, and two loops that can let you compare signal paths or combine them to create your magical masterpiece.

The Radial EXTC-SA is without a doubt one of the most innovative effect manipulating devices ever made. And it opens the door to new sounds by taking Reamping™ technology to an all new level.

The EXTC... be prepared for wild & wonderful!

Specifications

Details

Key Features:

  • Balanced interface for guitar effects pedals
  • Separate send & receive controls optimize signal path
  • Transformer isolation helps eliminate ground loops
  • Creative tool helps your mix stand out from the rest

Specifications:

Circuit type:Solid state with transformer coupled effects loop
Power requirement:60mA, ±16VDC
Output Gain:12dB - send & receive at maximum
SignalDryWet
Frequency Response:20Hz ~ 20kHz ±1.5dB20Hz ~ 10kHz ±3.5dB (-8dB @ 20kHz)
THD+N:>0.005% 0dB output>0.002% 0dB output
Noise:-93dB-84dB
Intermodulation Distortion:>0.003% 0dBu input<0.02% 0dBu input
Maximum input:+26dBu+20dBu
Effects Loop i/oSend 1/4" outputReceive 1/4" input
Connector:Unbalanced ¼"Unbalanced ¼"
Impedance:1.5k Ohms10K Ohms
Gain (Variable):From -14dB ~ +3dB 0dB at center pointFrom -99dB ~ +9dB 0dB at center point
Maximum Gain:±3dB+9dB
Line level i/oInputOutput
Connector*:Balanced XLR Female Rear PanelBalanced XLR Male Rear Panel
Impedance:15k Ohms200 Ohms
Headroom:N/A+25dBu

Video

Details