Questions?

Contact Phantom48 Customer Support.

Audio-Technica AT4041SP

$499.00
MSRP: $795.00 (Save 37%)
Special-Order

The AT4041SP is temporarily out of stock. Order today and Phantom48 will normally ship in about 5-6 business days.

The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live ...More Info

Details

The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

AT4041SP Studio Pack includes:

  • Two AT4041 cardioid condenser microphones
  • Two AT8405a stand clamps
  • Two AT8159 windscreens
  • Protective wooden storage case

Details

Key Features:

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing

Specifications:

ELEMENT:Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN:Cardioid
FREQUENCY RESPONSE:20-20,000 Hz
LOW FREQUENCY ROLL-OFF:80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY:-36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE:100 ohms
MAXIMUM INPUT SOUND LEVEL:145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE :121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO:70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS:48V DC, 3.2 mA typical
SWITCH:Flat, roll-off
WEIGHT:4.2 oz (120 g)
DIMENSIONS:6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter
OUTPUT CONNECTOR:Integral 3-pin XLRM-type
ACCESSORIES FURNISHED:AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE:S1

Description

Details

The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

AT4041SP Studio Pack includes:

  • Two AT4041 cardioid condenser microphones
  • Two AT8405a stand clamps
  • Two AT8159 windscreens
  • Protective wooden storage case

Specifications

Details

Key Features:

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing

Specifications:

ELEMENT:Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN:Cardioid
FREQUENCY RESPONSE:20-20,000 Hz
LOW FREQUENCY ROLL-OFF:80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY:-36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE:100 ohms
MAXIMUM INPUT SOUND LEVEL:145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE :121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO:70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS:48V DC, 3.2 mA typical
SWITCH:Flat, roll-off
WEIGHT:4.2 oz (120 g)
DIMENSIONS:6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter
OUTPUT CONNECTOR:Integral 3-pin XLRM-type
ACCESSORIES FURNISHED:AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE:S1